monofloat
THE EVERYDAY CROSSBODY

Light by
design.

Soft against you.
Gentle on what matters.

Room for the way your day changes.

The Monofloat crossbody in soft black nylon, with its diagonal flap, tonal embroidery and wide permanently attached strap.
DESIGN STUDY 0130 × 15 × 7.5 cm View dimensions +Dimensioned front and side outlines: 30 centimetres wide, 15 high and 7.5 deep, drawn at the same scale.

Proposed outer body dimensions. Final measurements will be confirmed through sampling.

Inside out: the details you feel

01 / UP CLOSETHE DETAILS YOU FEEL
SOFT NYLON. LIGHTWEIGHT CUSHIONING. A PLACE FOR YOUR PHONE AND WALLET. COVERED MAGNETS. NO ZIPPERS. ALWAYS ATTACHED. YOUR LENGTH. TWO SOFT PANELS. INDEPENDENTLY YOURS.
01 / THE FEEL

Softness.
Everywhere.

Supple nylon, softly padded. A fine, lightweight layer of cushioning sits between the nylon layers, giving the bag and wide strap a gentle, flexible feel. Soft against you and the things you carry.

Close view of the soft nylon lining and covered seams inside the bag.
02 / THE POCKET

Small things.
Within reach.

A full-width pocket keeps your phone and wallet within reach. Its soft flap has room to close comfortably even when the pocket is full, secured by two concealed magnets.

The full-width, full-height interior pocket with a straight flap and two concealed magnetic closures.
03 / THE OPENING

Less fuss.
Less noise.

The magnetic flap lifts easily for quick access to your belongings. Fabric-covered magnets replace sharp zipper teeth and loose, jangling hardware. The walls stay full height to keep the opening secure.

The diagonal front flap and its covered magnetic fastening.
04 / THE STRAP

Short today.
Long tomorrow.

Wear it on your shoulder or across your body. The wide strap adjusts to the way you carry. Permanently sewn at both ends, it carries the same soft, lightly padded construction as the bag.

The wide nylon strap permanently stitched into the bag, with no detachable clips.
05 / THE DIVIDERS

A little structure.
When you need it.

Keep small things separate, fold one panel for a wider camera, or fold both flat for one open compartment. The layout changes with what you carry.

Views change automatically. Select one to pause.

Angled top view of the empty Monofloat interior with both dividers folded flat, leaving one open compartment.
02 / YOUR SPACE

One space.
Your layout.

Separate your camera from the everyday essentials.
Or fold the dividers away for one open compartment.

See it in action.

Choose a control below to move each part.

TOP VIEW
Movement study of two dividers and an inside pocket, viewed from above The inside pocket is empty. The left divider meets the front face of the inside pocket below its flap. The right divider is folded flat against the front wall. BACK WALL INSIDE POCKET FRONT WALL
SIDE VIEW Pocket flapDivider
Side section showing pocket flap clearance above the dividers Both outer walls remain full height. The pocket runs from the inside top rim to the bottom seam. Dividers stop just above the floor, leaving a tiny gap so they can fold without rubbing. Their tops remain below the closed pocket flap. REAR FRONT Clearance DIVIDER OPEN 15 cm body height 7.5 cm body depth
Left divider: open
Right divider: folded
Pocket: empty
Pocket flap: closed

The pocket flap is closed. Each divider attaches below its lower edge.

Pocket empty. Left open. Right folded. Each panel moves independently.

The pocket flap sits above the divider tops.

Each moves independently.Use one divider, both, or neither.

Held with a light touch.Small covered magnets keep panels in place.

Made to fold.Soft dividers flex to make room when the inside pocket is full.

About this construction study

Each divider is sewn into the front wall. Its free edge meets a small, covered magnet on the pocket face below the closed flap. A soft fold accommodates the shorter reach when a phone and wallet fill the pocket. The pocket flap opens independently, while both outer walls stay full height.

Pocket depth and movement clearances are illustrative and will be checked in a sewn sample.

A street photographer carrying the compact Monofloat bag across the body.
03 / FROM THE STREET

For the walk.
And what you find.

It started with a camera and long days on foot. A bag should leave you free to notice what is happening around you.

That is where Monofloat began. An everyday bag, shaped by the way it is used.

04OTHER IDEAS

Concepts being considered.

The crossbody comes first. A few ideas for what might follow, still at the concept stage.

Taller Monofloat backpack concept in black, with a diagonal flap and a concealed catch study.
01

Backpack

A taller, light everyday backpack.
Exploring a concealed two-step flap catch to make casual opening more difficult.

Monofloat camera strap concept in black, with split-ring ends for camera lugs.
02

Camera strap

Soft, wide and adjustable.
Split-ring ends for camera lugs.

Monofloat square fold bag concept in black, shown as a standalone product study.
03

Square fold

A compact, squarer bag.
The familiar angle in a new form.

Monofloat laptop carry concept in black, with a broad accessory pocket beneath the diagonal flap.
04

Laptop carry

A slim sleeve with a strap.
A broad accessory pocket fills the front beneath the angle.

Monofloat film bag concept in black, with an angled flap and a strap for waist or crossbody wear.
05

Film bag

A few rolls. A few essentials.
For the days you want to carry less.

Monofloat phone pouch concept in black, shown as a standalone product study.
06

Phone pouch

A compact vertical carry.
For the phone that comes with you.